Therma-Flite
Contact: Sales Manager
PO Box 847
947 Tyler St.
Benicia, CA 94510
U.S.
Phone: 707-747-5949
Fax: 707-747-5951
Therma-Flite designs, manufactures, and supplies screw-type thermal processors used in a variety of industrial applications. Therma-Flite developed the world renowned "Holo-Scru" processor, which is widely used for heating, drying, blanching, cooking, sanitizing, calcining, and many other operations involving heat transfer technology.
Services Offered: Industries Served:
* Engineering / Design / Manufacture of Process Equipment
* Machine Work
* Fabrication / Welding
* Equipment Repair
* Field Service
* Technical Support
* Petro-Chemical
* Chemical
* Waste Water Treatment
* Power Generation
* Food Processing
* Mining
* Manufacturing
* Construction
* Steel
* Cement
* Coal Processing
* Recycling
Process Equipment > The "Holo-Scru" Processor
General Description
The Holo-Scru Processor is an indirect heat exchanger comprising of a series of rotating helical ducts or hollow flights. Heat is transferred via a heat exchange agent through the inner surfaces of the hollow flights and shaft. And since the principle of the conveyor is employed the particles of the material within the mass are subjected to continuous movement by the helices and are constantly changing location. This causes them, as they move through, to come into frequent and repeated contact with the surface containing the heat exchange agent. The slow, rotation, conveying, interfolding and dispersing action increase the heat exchange with the product. The motion is however so mild and gentle that there is no dusting nor particle degradation.
The Holo-Scru is widely used for cooling, heating, drying and other operations where heat transfer is involved. Heat transfer agents such as refrigerants, water, steam or hot oil provide for a wide range of processing temperatures. Since assembly may be arranged in tiers, the heat exchange agent for heat sensitive products can be introduced into each tier individually at the desired temperature. In this way shock treatment can be controlled and undesired chemical reactions avoided. In a continuous operation, by using the proper temperature in each tier, the product can be progressively heated or cooled to meet specific processing requirements. Therefore the Holo-Scru transfers energy to the product by conduction.
Space Required
The Holo-Scru Processor has a large heat transfer surface per lineal foot. This area divided into the cubical volume per lineal foot results in an effective layer thickness of approximately one inch. The effective layer of material one inch deep is continuously dispersed over the heat transfer surface by the rotating helical ducts (flights). This means that high rates of heat transfer may be obtained with materials and under conditions otherwise impossible to achieve economically.
The compact design of the Holo-Scru Processor not only requires minimum space, but because a number of tiers can be stacked vertically, ground or floor space can be saved. Probably no other heat exchanger requires as little space.
Economy With Efficiency
The Holo-Scru heat transfer areas are covered with the material being processed, and therefore the thermal efficiency is the much higher than other types of heat exchangers.
Construction and Operation
Although the Holo-Scru Processor can be furnished with a single screw, the standard configuration for most application consists of two or four hollow helical screws. The assembly of the trough and screws with suitable bearings, synchronizing gear, heat transfer agent connections and material inlet and outlet ports constitutes a tier. The overall length of a tier ranges from 8 to 27 feet.
According to the particular application, a Holo-Scru Processor may consist of one or more tiers. The tiers may be placed one above the other or when necessary, may be strung out horizontally as conveyor system.
The screws are built to suit the application and the diameters can range from 6 48 and built of material such as steel, stainless steel, monel and other alloys.
The heart of the Holo-Scru Processing System is explained below. The heat exchange agent first moves through a rotary joint and into the hollow shaft of the rotor, down the entire length of the assembly. It then turns into the helical outer portion of the unit, returning through the series of hollow flights to the starting point. Thus, the continuous spiral conveyor action combines the heating or cooling effect of the agent within the conveyor itself. Two or four such units, intermeshing, are normally used. The walls of the troughs are employed as additional heat transfer surfaces.
Possible Applications:
Cooling:
* Inlet Temperatures up to 1600° F and Outlet Temperatures as low as 30° F
* Ash from coal fired power plants.
* Sewage and other waste products.
* Mineral products such as fluorspar, iron oxide, gypsum, bauxite, croyolite and the high temperature calcines.
* Chemical products such as flake caustic, phospate, soda ash, coke char, carbon, plastics, silicates, etc.
* Food products such as salt, sugar, flour, cake mix, pie fillings, ground meat, etc.
* Meal cakes such as cottonseed, flax seed, soybean, etc.
* Foundry Sand
Heating:
* Heating up to 700° F
* Pre-heating ahead of processing or drying operations.
* Temperature control between processing steps.
* Sterilization of food products.
* Contaminated Soils and sludge.
Drying and Calcining:
* Water removed form slurries, sludges, and filter cakes.
* Calcining of gypsum.
* Vacuum drying of heat sensitive products.
* Solvent Recovery
Solvent removal form polyethylene, polypropylene, rice bean, soybean meal and chemicals.
Cooking:
* Fruits / Vegetables
* Fish Meal
* Processed Meats
* Baby Food / Applesauce
Features and Advantages:
Adaptability to Process
* No direct contact with the heat exchange medium
* Close control of material as to temperature and time of treatment
* Control of quantity of heat exchange agent
* Individual control of temperature of heat exchange agent in each screw or tier. On heat sensitive products, the heat exchange agent can be introduced into each tier individually at the desired temperature.
* One or all of the functions of heating, drying and cooling to be done continuously in the same unit.
* Heat transfer agent may be circulated either parallel or counter current to the flow of the material.
* Compact design is ideal for vacuum processing
* Inert gas atmospheres readily maintained in material compartment
* Sticky materials can be handled due to positive conveying action of multiple screws
* Can be operated on an incline
* Can be constructed with material that can resist high heat and corrosive product.
* Equipment can be adapted to process different product
* Gentle agitation and mixing with freedom from particle degradation
Twin "Holo-Scru" for Drying Chemical Catalyst
"Holo-Scru" Granular Wax Heater
"Holo-Scru" Ash Cooler Designed for 300 PSIG Operation
"Holo-Scru" Pulp Cooler
Dried Granular Sludge Cooler
Ash Cooler in Operation
> Electric-Scru Processor
