BIZ-AL Feed Screw Inc.

Contact: Sales Manager

386 / 388 Deerhurst Dr.
Brampton, Ontario L6T 5H9
Canada

Phone: 905-458-4404
Fax: 905-458-4001

Website

E-mail

BIZ-AL Feed Screw Inc. is a well-established company in Canada. We have been in the plastic industry for over 22 years, specializing in feed screw design, manufacturing, and rebuilding all types of feed screws.



Our company manufactures new feed screws for: blow film, blow molding, injection blow molding, compounding & palletizing, extrusion, and injection [either single (including 3 piece tip) or 2 stage]. Our capacities of manufacturing screws are from ½”-10” in diameter, with a maximum length of 300”. However, a screw measuring over 240” and up to 300” will be in 2 pieces with a thread connection.



BIZ-AL Feed Screw Inc. is equipped with a design team, who create designs specific to your company’s machine’s motor horsepower, RPM extruder, die size, and cooling time, for all types of materials (LDPE, HDPE/HDPE--HMW, LLDPE, PP, PS/PS-HI, PC, FPVC, RPVC, PVDC, Nylon, PET-G, E-PET, EVA, TPR, TPV, to name a few) you run. In doing so, we have maximized its capacity including its output, mixing, and low melt temperature.



Our designs have been used by numerous machines in North and South America, Europe, and China. To name a few:


· Blow film: Brampton Engineering, Macro Engineering & AR Engineering


· Blow Moulding: Jomar, Bekum, Fisher, Noma Chemical & Automa


· Injection: Engel, Husky, HPM & Kawaguchi


· Compound/pelletizing: Pti, Berlin, Colortech & Aclo


· Extrusion: Polytruder, Delta Plast, Future Design & Sterling.



All general purpose screws are made of 4140 HTSR materials, we also offer special applications of Dura Nickel, Hastalloy, Inconell, and Stainless Steel.



We use a PTA Plasma Welding System to weld the top flights, with Colmonoy #56, 88, or 83; or Stellite #1, 12, or 6. If you are running a hard or abrasive material, for example, glass field, we offer screws made from D2 material (through hardening to 60-62 RC), or Nitraloy M-135 material (nitrided .020 deep to 67-69 RC).



We also supply barrels/cylinders with bimetallic ID liner, a general purpose liner, 60-62 RC hardness, .060-.080 liner thickness per side, or a harder carbide liner of 60-70 RC (if you are running some hard or abrasive material), for all plastic machines. This allows the barrel to be honed a few times while still maintaining its ID hardness.



BIZ-AL Feed Screw Inc. also rebuilds existing screws to fit your barrel ID size, and we also modify screws in order to obtain greater performance.



We hope this letter of introduction on BIZ-AL Feed Screw Inc. has been informing. If however, you have any further questions or concerns, please do not hesitate to contact us or one of our representatives.



We look forward to doing business with you.