AIMS Ltd.
Contact: Sales Manager
Litton house
Global Business Park, Seville Rd.
Peterborough, Cambridgeshire PE3 7PR
UK
Phone: 44 0 1733 765084
Fax: 44 0 1733 765086
AIMS (Manufacturing) Limited can provide you with a manufacturing facility to put a corrosion and/or wear resistant surface on your components.
Without compromising critical strength and weight properties, we can atomically bond an armoured surface to suit your particular components requirements. Pump bodies, extruder barrels, shot sleeves, die components and similar parts can have their working life extended by many times. This, and the resulting reduction in down-time to replace worn components, more than justifies the additional cost of our process.
To find out more about this practical and cost effective solution, or to arrange a confidential meeting to discuss your particular product, contact us now.
For Your Information:
The atomic diffusion bonding of one of the family of Sagittite powder metal alloys is achieved during a hot isostatic pressing (HIP) process.
Advanced Interactive Materials Science Limited can provide you with a comprehensive materials advisory service.
If you have: -
* a materials selection and treatment problem
* a corrosion problem
* a wear problem
* a component failure problem
AIMS can assist you find a solution.
If you need: -
* an independent failure investigation and fracture analysis
* wear or corrosion analysis or testing
* a materials research resources
* a project management resource
* assistance with component / machine design to overcome any or all of the above problems
AIMS can provide you with a service.
We can undertake your design and development work, either in-house working with your designers, or off-site with our own team of design engineers.
Advanced Interactive Materials Science Limited can provide you with a comprehensive materials advisory service.
If you have: -
* a materials selection and treatment problem
* a corrosion problem
* a wear problem
* a component failure problem
AIMS can assist you find a solution.
If you need: -
* an independent failure investigation and fracture analysis
* wear or corrosion analysis or testing
* a materials research resources
* a project management resource
* assistance with component / machine design to overcome any or all of the above problems
AIMS can provide you with a service.
We can undertake your design and development work, either in-house working with your designers, or off-site with our own team of design engineers.
AIMS (Manufacturing) Limited can provide you with a manufacturing facility to put a corrosion and/or wear resistant surface on your components.
Without compromising critical strength and weight properties, we can atomically bond an armoured surface to suit your particular components requirements. Pump bodies, extruder barrels, shot sleeves, die components and similar parts can have their working life extended by many times. This, and the resulting reduction in down-time to replace worn components, more than justifies the additional cost of our process.
To find out more about this practical and cost effective solution, or to arrange a confidential meeting to discuss your particular product, contact us now.
For Your Information:
The atomic diffusion bonding of one of the family of Sagittite powder metal alloys is achieved during a hot isostatic pressing (HIP) process. The picture on the right shows a Sagittite coated extruder barrel
We concentrate on the design, manufacture and application of materials for use in demanding environments, on technologically advanced machinery or for demanding duties, that require a high degree of specialist knowledge.
Our expert personnel, assisted by top-class academics from Cranfield University, have years of experience that can be deployed to benefit your product or process.
Our expertise is available to you, either on a Project or Retainer basis.
