Gmdiag
Based in the North West of England GENERAL MAINTENANCE & DIAGNOSTICS LTD was formed in September 2003 by Mr Gary Meekin.
Gary has spent over 20 years in the injection moulding business as a Process Technician and had spent the last 10 years as Works Engineer & Technical Support for a local Injection Moulding & Extrusion Company.
With a long history in Hydraulic & Electrical Engineering Gary decided to form General Maintenance & Diagnostics Ltd.
We offer Engineering & Technical Support Services over a wide range of industries.
This service is offered either on an hourly or daily basis or as a yearly service contract
We also offer our customers the opportunity to allow us to take care of total site maintenance incl woodworking & joinery services carried out by our own time served joiners. We can also take care of general building and utility repairs.
We can offer:
Injection Moulding Technical Support
Industrial Machinery Repairs & Servicing
Machine Installations
Compressor Installations & Servicing
Compressed Air Conditioning Incl. Air Oil / Water Separation
Pipe Fitting for Compressed Air & Cooling Water
Portable Appliance Testing Incl. 110v 240v & all I.T Equipment
Total site maintenance and building repairs
We offer our customers the full service required whether it is a new installation or a replacement machine.
As we all know most industrial machinery require at least three things:
1.
Electricity
2.
Chilled Water
3.
Compressed Air
If required we can do the lot. We have found that this gives our customers peace of mind in the knowledge that there project is concentrated to just one supplier rather than being fragmented over as many as four or five individual contractors, all of which assume that their part of the project is the most important and that everyone else is just getting in the way.
Modifications to all pipe work is not a problem whether it is in plastic, galvanised or even stainless steel.
We can also supply and fully install Single and Multi Stage water pumps and either New or Second Hand Compressor units and Air Oil & Water separation systems if required.
P.A.T Training Sales & Servicing
Portable Appliance Testing or P.A.T is necessary to protect your business and your employees as well as the general public.
At General Maintenance & Diagnostic Ltd our aim is to offer a service that is not just competitive but is also reliable and professional.
q. What is a Portable Appliance?
a. Anything with a mains plug.
This includes:
Kitchen appliances i.e. cookers, kettles and toasters
Computer or IT equipment i.e. monitors towers & printers
Power tools (240v & 110v) i.e. drill saws & planers
Extension leads (240v & 110v)
Office equipment i.e. photocopiers & shredders
All our technicians are trained to carry out portable appliance testing in accordance with the code of practice laid down by the Institute of Electrical Engineers (I.E.E).
Are you a building contractor or joiner?
Do you need your 110v equipment tested? You won't get onto most sites without it!!!!!
We also offer microwave leakage testing as part of our P.A.T testing service.
Our service includes:
Thorough visual inspection
Testing on our latest P.A.T testing equipment
Pass or fail labels
Itemized appliance lists with test results
Plug rewire if required
Fuses replaced free of charge
Injection Moulding:
Due to our vast experience with the injection moulding process we are able to offer a service of not just installing the machine but to commission the machine on our customers behalf. This includes the installation of tooling, setting moulding parameters and conditions according to the requirements of the finished product and running the machine in a full production environment in most types of engineering and none engineering grade thermoplastics.
We can also extend this service towards the Injection Rubber (EPDM) sector.
Extrusion Machinery:
We can provide our customers with all the assistance needed when extrusion lines are being installed.We will not only install the extruder electrically but we will install and commission the haul off, calibration table and cutting devices or saws.
This would include all pneumatic, water and electrical requirements.
