Adaptive Technologies Industries
Contact: Sales Manager
7845 Cessna Ave.
Gaithersburg, MD 20879
U.S.
Phone: 301-519-1174
Fax: 301-519-8554
AT100 Beta Gauging Systems and RTG Software provide an unbeatable combination in improving ROI and providing solutions to many manufacturing problems, such as reducing scrap and variations. The system can suit almost any thickness measurement application, , such as plastic sheet or film, coating, nonwovens and more! Some examples are listed in our Applications Listings The AT100 Beta Gauge System can be added to as needs and budgets allow. You can start small and start saving fast! Adding gauges with your savings is easy!
Using a compact interface, the AT100 connects to any IBM compatable PC, desktop or laptop, using a standard RS-232 serial port. No special interface cards are required. The result is a highly portable thickness gauging solution.
Set-up is easy: The AT100 (or AT1000) detector plus into an interface, which plugs into a standard serial port on the computer. The gauge has a small transformer for power, which plugs into a standard 115 VAC outlet. The AT100 and source mount on a small c-frame, which is then placed on your process line, so the web passes between the detector and source. That's it! You can be up and measuring in just minutes!
ATI's RTG software quickly installs on your desktop or laptop PC. RTG converts the detector readings into thickness or basis weight measurements in units of your choice - gsm, oz/ft, mils, etc. It also provides statistical and SQC information, and allows for datalogging and recording of measurements. Multiple recipies may be entered, allowing a single gauge to meausure a wide range of products.
The AT100 uses a reliable solid state PIN diode detector, no fragile PMTs or ion chambers, with their associated high voltage power supplies. The AT100 also uses much smaller activity sources than conventional gauges, resulting in safer operation.
If you need to be able to quickly set up a thickness gauge, please consider the AT100 portable thickness gauge.
The EzGage system offers quality and process control at an affordable price. The system is based upon ATI's patented solid state technology, ensuring optimum performance. Fast and accurate basis weight measurements have never been easier.
The Gamma One is a break from the conventional in gamma backscatter gauges. Utilizing solid state technology and an onboard microprocessor makes the time between purchase and ROI unbelievable!
The Gamma One works with ATI's RTG Software. You can even mix Gamma and Beta gauges on the same line, using the same computer. An analog voltage output is available for process control feedback.
