First Choice Portable Chillers Inc.

Contact: Sales Manager

7-111 Esna Park Dr.
Markham, ON L3R 1H2
Canada

Phone: 877-513-8310
Fax: 905-513-8358

Website

E-mail

1st Choice Chillers manufactures industrial portable chillers for the plastics industry. While our chillers were designed with injection molding in mind, they are ideally suited for all plant environments, including but not limited to plastics, rubber, chemical, printing, petrochemical, petroleum, pharmaceutical, food processing, beverage and others. As our signature product, our mold chillers are what we do best. If you need a chiller right away for your injection molding process, we offer immediate delivery from stock or 2 to 4 weeks if otherwise.

1st CHOICE PORTABLE CHILLERS offers the most comprehensive warranty in the industry! We warrant our equipment to be free from defects in material and workmanship under normal use starting from date of shipment as follows:


3 YEAR compressor replacement warranty.
2 YEAR parts warranty on the balance of the unit.

SUPPORT:
Start-up assistance and ongoing technical support is just a phone call away using our total free number: 877.513.8310

CAPACITY:
CONTROL
Hot gas by-pass reduces capacity to 50% on single compressor units and compressor cycling and hot-gas reduces capacity to 25% on dual compressor units.

FREEZE
PROTECTION:
We use both a water flow switch and a freeze thermostat in the evaporator out line.

CONDENSER:
Air cooled: Copper tube with aluminum fins, rated for 400 psi.
Water cooled: stainless steel brazed plate, coaxial tube-in-tube or shell and tube.

WATER
FITTINGS:
Non-rusting galvanized steel and plastic.

REFRIGERATION:
We use Alco or Sporlan for thermal expansion valve, liquid line and hot gas solenoids, liquid line sight glass and filter dryer.